5.
Apply medium-strength (blue) thread locker to
the threads of the bolt.
6.
Hold a 28 mm wrench on the wrench flats of the
piston shaft. Screw the bolt onto the shaft and
torque to 100 ft-lb (135 N•m).
7.
Rotate the drive shaft to move the piston fully
to one side. See instructions in step 4 of
Disassemble the Overmolded Diaphragms, page
16
8.
Repeat to install the other diaphragm assembly.
9.
Attach the fluid covers.
10. Reassemble the check valves and manifolds.
See
Reassemble the Ball Check Valve, page 11
.
11. Restore motor cooling fan cover and pin (131) to
their original locations.
1
Rounded side faces diaphragm.
1–Piece
1–Piece
1–Piece (((
EO
EO
EO
))) Model
Model
Model
2
Apply medium-strength (blue) thread
locker to the threads.
3
Apply primer to the female threads.
Allow to dry.
3A5133J
17
Summary of Contents for saniforce 2150
Page 24: ...Parts Parts Parts Parts 2150T 2150T 2150T Pump Pump Pump 24 3A5133J ...
Page 25: ...Parts 2150HS 2150HS 2150HS Ball Ball Ball Check Check Check Pump Pump Pump 3A5133J 25 ...
Page 26: ...Parts 3000HS 3000HS 3000HS Flapper Flapper Flapper Pump Pump Pump 26 3A5133J ...
Page 27: ...Parts 4000HS 4000HS 4000HS Flapper Flapper Flapper Pump Pump Pump 3A5133J 27 ...