System
Before performing any troubleshooting procedures:
1. Relieve Pressure. See
Pressure Relief Procedure, page 42
2. Turn main power switch OFF.
3. Allow equipment to cool.
Problem
Cause
Solution
No power.
Turn main power switch ON.
Failed 24 V power supply.
Replace power supply.
Reactor ADM does not turn on.
Failed surge protector.
Replace surge protector.
Loose connections.
Check MCM connection 13.
Tripped circuit breaker (CB02).
Reset breaker, see
. Check
240VAC at output of breaker.
Electric motor does not operate.
Shorted windings.
Replace motor, see
Repair Electric Motor, page 53
.
333024A
35
