Gun Setup
13. Fully open the fan air adjustment valve (F)
counterclockwise.
14. Fully open the fluid adjustment valve (H)
counterclockwise.
15. Fully open the atomizing air restrictor valve (G)
clockwise.
16. Turn ON (I) the ES On-Off switch (J).
17. Set the gun air regulator to deliver a minimum
45 psi (0.32 MPa, 3.2 bar) at the gun when
triggered, to ensure full spraying voltage. See
the table below.
Table
Table
Table 2
2
2 ... Pressure
Pressure
Pressure Drop
Drop
Drop
Air
Air
Air Hose
Hose
Hose
Length
Length
Length in
in
in ft
ft
ft (m)
(m)
(m)
(using
(using
(using 5/16
5/16
5/16 in.
in.
in. [8
[8
[8
mm]
mm]
mm] diameter
diameter
diameter hose)
hose)
hose)
Air
Air
Air Regulator
Regulator
Regulator Setting
Setting
Setting
in
in
in psi
psi
psi (MPa,
(MPa,
(MPa, bar)
bar)
bar)
[with
[with
[with gun
gun
gun triggered]
triggered]
triggered]
15 (4.6)
55 (0.38, 3.8)
25 (7.6)
65 (0.45, 4.5)
50 (15.3)
80 (0.56, 5.6)
18. Check that the ES indicator (K) [Hz indicator on
Smart guns] is lit. See the following table.
Table
Table
Table 3
3
3 ... LED
LED
LED Indicator
Indicator
Indicator Colors
Colors
Colors
Indicator
Indicator
Indicator
Color
Color
Color
Description
Description
Description
Green
When spraying, the indicator
should remain green, indicating
sufficient air pressure to the
alternator turbine.
Amber
If the indicator changes to amber
after 1 second, the air pressure
is too low. Increase air pressure
until the indicator is green.
Red
If the indicator changes to red
after 1 second, the air pressure is
too high. Decrease air pressure
until the indicator is green.
3A2494D
19
