Installation
3A5266G
9
Fill Reservoir
Oil Models
1. Open oil fill cap (32) on the top of the reservoir.
NOTE:
A filter (33) is installed at the oil fill cap (32) to
prevent lubricant contamination (F
. 6).
a. Inspect filter (33) before filling reservoir.
b. When needed, remove filter (33) and clean it
thoroughly.
c. If removed in Step b, install filter (33) prior to
adding lubricant.
2. Slowly add oil (
ol
) until reservoir is filled to capacity
. 7). Take care to not fill reservoir too quickly
and overflow the reservoir capacity.
3. Close oil fill cap (32) to prevent contamination and
spillage (F
. 7).
Grease Models
1. Remove dust cap (42) (F
. 8) from fill stud (26).
2. Connect the quick connect fitting on the fill pump
to the fill stud (26) on the reservoir.
F
IG
. 6
32
33
F
IG
. 7
F
IG
. 8
32
ol
26
42
