HMI Operation
313877G
29
Dispense Complete
This displays “1” if the metering rods are reloaded with
material or at the end of the dispense cycle, and dis-
plays a “0” if the metering tube is loaded with material
and ready to dispense. Customer Signal Integration Kit
80/2450/CS/50, which uses this output, can be ordered
separately. The Customer Signal Integration Kit is stan-
dard on Motor Driven PD44s.
Co button
This button increases the contrast of the screen.
Contrast - button
This button decreases the contrast of the screen.
PX-CSV Reload
This displays the status of the reload spool proximity
switch. If this displays a “1” the switch is activated and if
this displays a “0” the switch is deactivated. See Com-
ponent Identification section in dispense valve manual.
See
PX-OSV Dispense
This displays the status of the dispense spool proximity
switch. If this displays a “1” the switch is activated. If this
displays a “0” the switch is deactivated. See component
identification section in dispense valve manual. See
PLC Program (Micrometer and LRT PD44 only)
This gives the currently installed PLC program version
and revision level.
HMI Program (Micrometer and LRT PD44 only)
This gives the currently installed HMI program version
and revision level.
