![background image](http://html.mh-extra.com/html/graco/linelazer-iv-3900/linelazer-iv-3900_repair-parts-list-manual_2250945019.webp)
Trigger Sensor Adjustment
312195B
19
Engine Stop Switch
Note: A complete wiring diagram is on page 34.
Removal
1.
Relieve pressure, page 6.
2.
. 13. Remove two screws (125) and cover (31).
3.
Remove two spade connectors from ENGINE STOP
switch (15f).
4.
Press in on two retaining tabs on each side of
ENGINE STOP switch and remove switch.
Installation
1.
Install ENGINE STOP switch (15f) so tabs of switch
snap into place on inside of pressure control hous-
ing.
2.
Install cover (31) with two screws (125).
Trigger Sensor Adjustment
Refer to
for trigger sensor adjustment,
and see operation manual.
Distance Sensor Replacement
1.
Remove wheel (120) from LineLazer.
2.
Remove screw (273), wire clamp (115) and distance
sensor (66).
3.
Install new distance sensor (66) with wire clamp
(115) and screw (273).
4.
Install wheel (120) on LineLazer.
F
IG
. 14
TI10237a
142
127
120
66
273
115
130
130
Summary of Contents for LineLazer IV 3900
Page 37: ...Dimensions 312195B 37 ...