Connect
Connect
Connect Hydraulic
Hydraulic
Hydraulic Lines
Lines
Lines
NOTICE
NOTICE
NOTICE
The hydraulic supply system must be kept clean
at all times to avoid damage to the motor and
hydraulic power supply. Blow out all hydraulic
lines with air and flush thoroughly with compatible
solvent before connecting the lines to the motor.
Always plug the hydraulic inlets, outlets, and lines
when disconnecting them for any reason, to avoid
introducing dirt and other contaminants into the
system.
Wall
Wall
Wall Mount
Mount
Mount Model
Model
Model 24W891:
24W891:
24W891:
1.
Connect a 3/4 in (19 mm) minimum ID hydraulic
supply line (E) to the inlet port of the hydraulic
motor (B)
2.
Connect a 3/4 in. (19 mm) minimum ID hydraulic
return line (D) to the outlet port of the hydraulic
motor (B).
Figure 1
All
All
All Other
Other
Other Models:
Models:
Models:
1.
Connect a 3/4 in (19 mm) minimum ID hydraulic
supply line (E) to the supply inlet port of the
hydraulic regulator (C). The system is shipped
with a second line (72) connected from the supply
outlet port of the regulator (C) to the inlet port of
the hydraulic motor (B).
2.
Connect a 3/4 in (19 mm) minimum ID return
line (D) to the return outlet port on the hydraulic
regulator (C). The system is shipped with a
second line (73) connected from the return inlet
port of the regulator (C) to the outlet port on the
hydraulic motor (B).
Wall
Wall
Wall
Mount
Mount
Mount
Cart
Cart
Cart
Mount
Mount
Mount
8
334187H
