Disconnect
Disconnect
Disconnect the
the
the Hydraulic
Hydraulic
Hydraulic Motor
Motor
Motor
1.
Flush the pump, if possible. Stop the pump at
the bottom of its stroke.
2.
Follow the
Pressure Relief Procedure, page 12
.
3.
Disconnect the displacement pump hoses.
Disconnect the hydraulic hoses and plug all
hydraulic connections and lines to prevent
contamination.
4.
Follow all steps under
Disconnect the Displacement Pump, page 16
5.
Unscrew the nuts (14) and remove the washers
(13).
6.
Use a lift or two people to lift the motor (1) off the
mounting bracket.
7.
Unscrew four mounting spacers (12). Remove
the standoff bracket (3).
Service
Service
Service the
the
the Hydraulic
Hydraulic
Hydraulic Motor
Motor
Motor
Refer to Motor Manual 307158 (supplied and also
available at
).
Reconnect
Reconnect
Reconnect the
the
the Hydraulic
Hydraulic
Hydraulic Motor
Motor
Motor
1.
Align the holes and use the four mounting
spacers (12) to attach the standoff bracket (3)
to the motor.
2.
Use two people to lift the motor (1) onto the
mounting bracket. Align the hydraulic fittings with
the controls.
3.
Install a washer (13) and nut (14) on each
mounting spacer (12). Tighten nut securely.
4.
Follow all steps in
Reconnect the Displacement Pump, page 17
.
18
334187H
