![background image](http://html1.mh-extra.com/html/graco/geo-blaster-gb1200/geo-blaster-gb1200_operation-and-parts_2252667015.webp)
Operation
3A4167C
15
Refilling the Blast Pot
1.
Push E-stop (M) down.
2.
Turn selector valve (K) to Off.
3.
Open dump valve (N) until pot pressure gauge (G)
reads 0 psi. Then push down and lock plunger in the
open position.
4.
Fill blast pot with abrasive material. Drain off excess
water through dump valve (N), allowing abrasive to
displace water.
5.
Close dump valve (N) and refill blast pot with water
until water level is above pop up seal.
6.
Turn plunger to the unlock (up) position.
WLE
Summary of Contents for Geo Blaster GB1200
