8.
Turn the selector valve to RINSE.
9.
Disengage the Emergency Stop.
NOTE:
NOTE:
NOTE: The water pump will not work unless the
Emergency Stop is disengaged.
10. Align the bung handle with the pin slot, and then
firmly push and turn the handle 90° after the pin
is below the bracket slot. Proper engagement of
the pin will hold the bung down until it is released.
11. Add 10 gallons (30 liters) of fresh water to
the pot. Wear appropriate personal protective
equipment, including an appropriately fit-tested
government approved respirator suitable for the
dust conditions. Add abrasive material (minimum
four bags, maximum ten 50 lb (23 kg) bags of
high-mass abrasive, or eight 50 lb (23 kg) bags
of low mass abrasive).
1
2
10 gal
(30 L)
200-500 lb
(90-227 kg)
12. Use a garden hose or the rinse hose to wash the
abrasive into the pot and clear any abrasive from
the bung and bung seal.
12
334143C
Summary of Contents for EcoQuip 300
Page 5: ...Notes Notes Notes Notes 334143C 5...
Page 34: ...Parts Parts Parts Parts EQ300 EQ300 EQ300 and and and EQ600 EQ600 EQ600 34 334143C...
Page 36: ...Parts Enclosure Enclosure Enclosure 12 Torque fitting to 35 40 ft lb 47 54 N m 36 334143C...
