Graco EcoQuip 2 Vapor Abrasive Blast System Page 14 Operation, Repair, And Parts Download

Page: 14 / 74

Operation

Setting

Setting Up

Up the

the

the Equipment

Equipment

Fill the water tank with fresh water only, then
open the inlet ball valve (N).

Close the rinse ball valve (X) and abrasive ball
valve (M). Close the water dose meter (S) if
equipped.

Turn the selector valve to OFF.

Disengage the emergency stop (Q).

NOTE:

NOTE: The water pump will not work unless the
Emergency Stop is disengaged.

Align the pop-up handle with the pin slot, and
then firmly push and turn the handle 90° after the
pin is below the bracket slot. Proper engagement
of the pin will hold the pop-up down until it is
released.

Open the pot dump valve (J).

3A3489E

All manuals and user guides at all-guides.com

Summary of Contents for EcoQuip 2 Vapor Abrasive Blast System











































































Search results

Summary of Contents for EcoQuip 2 Vapor Abrasive Blast System

Reviews:

Related manuals for EcoQuip 2 Vapor Abrasive Blast System

Brands by name

Popular brands

Graco EcoQuip 2 Vapor Abrasive Blast System, Operation, Repair, And Parts

Search results

Summary of Contents for EcoQuip 2 Vapor Abrasive Blast System

Reviews:

Related manuals for EcoQuip 2 Vapor Abrasive Blast System

Brands by name

Popular brands