5
308266
Operation
Pressure Relief Procedure
WARNING
SKIN INJECTION HAZARD
The system pressure must be manually
relieved to prevent the system from
starting or spraying accidentally. Fluid
under high pressure can be injected through the
skin and cause serious injury. To reduce the risk of
an injury from injection, splashing fluid, or moving
parts, follow the
Pressure Relief Procedure
whenever you:
D
are instructed to relieve the pressure,
D
stop spraying,
D
check or service any of the system equipment,
D
or install or clean the spray tips.
1.
Shut off the air and fluid supply to the dispense
valve.
2.
Point the valve into a pail, and trigger the valve to
relieve pressure.
3.
If you suspect that the needle nozzle or hose is
completely clogged or that pressure has not been
fully relieved after following the steps above, very
slowly loosen the needle nozzle or hose end cou-
pling and relieve pressure gradually, then loosen
completely. Now clean the needle nozzle or hose.
Summary of Contents for DynaMite 224906
Page 9: ...9 308266 Notes...
