3
308266
Installation
NOTE:
Read and understand this entire manual before
operating the Dispense Valve.
NOTE:
The dispense valve requires a minimum air
inlet pressure of 40 psi (2.8 bar).
Mounting Accessories
Mounting Stand Kit
Mounting Stand 235270 is available for applications
requiring mounting the valve in a fixed position. The kit
includes instructions. See
Accessories
on page 12.
Foot Valve Kit
Foot Valve 235830 enables the operator to trigger the
dispense valve with a foot pedal. The kit includes
instructions. See
Accessories
on page 12.
Handle Kit
Handle Kit 235269 is available to convert Model
224906 Dispense Valve to Model 235877. The kit in-
cludes instructions. See
Accessories
on page 12.
Installing the Needle Nozzle
NOTE:
This dispense valve is supplied with two needle
nozzle sizes (.047 in. and .063 in. I.D.). Other sizes
are available (see page 12).
To install needle nozzles 112000 through 112007,
wrap the threads of the needle nozzle with PTFE tape
and screw the needle nozzle (14) securely into the
housing (12). See Fig. 1.
NOTE:
When removing a needle nozzle, hold the
needle nozzle housing (12) with a wrench to keep it
from moving. Using another wrench, remove the
needle nozzle (14) from the housing.
NOTE:
Other needle nozzle sizes are available (see
Accessories
on page 12). To use these needle
nozzles, you must also purchase Needle Adapter
109599.
To install these needle nozzles,
wrap the
threads of the 109599 needle adapter with PTFE tape
and screw the adapter securely into the needle nozzle
housing (12). Push the needle nozzle into the adapter
and turn clockwise to lock.
Fig. 1
12
14
KEY
12 Needle Nozzle Housing
14 Needle Nozzle
01796
Model 235877 Shown
Summary of Contents for DynaMite 224906
Page 9: ...9 308266 Notes...
