4
308266
Installation
Connecting the Air and Fluid Lines
NOTE:
To change the relative positions of the fluid in-
let (C) and air fitting (10 or 106), loosen the valve
housing swivel (11), reposition the fluid inlet, and re-
tighten.
1.
Connect the air supply tube (A) to the air inlet fit-
ting (10 or 106) by pushing the tube straight into
the fitting until it seats. To check that the tube is
secure, pull back on it gently, to ensure that it will
not pull out. See Fig. 2.
NOTE:
If cutting the tube, cut it at 90
_
, being careful
not to damage the outer diameter of the tube. Use of a
tube cutter is recommended. The fitting will leak if the
tubing is not cut at 90
_
.
2.
Connect the fluid line (B) to the 1/8 npt(f) fluid inlet
(C) of the dispense valve. For convenience, use
hose ties (E) to fasten the fluid line and air line to-
gether.
NOTE:
Fluid Hose Kits are available. See
Accesso-
ries
on page 12. The kits include a length of hose (B)
and a fluid inlet swivel (D).
Fig. 2
02169
KEY
10 Air Inlet Fitting (Model 224906)
11 Valve Housing (Swivel)
106 Air Inlet Fitting (Model 235877)
A
Air Supply Line (not supplied)
B
Fluid Supply Line (not supplied)
C
Fluid Inlet
D
Fluid Inlet Swivel (not supplied)
E
Hose Tie (not supplied)
01797
10
106
A
B
C
E
Model 235877
(shown with air line and
optional fluid hose kit installed)
D
A
B
E
11
C
11
D
Model 224906
(shown with air line and
optional fluid hose kit installed)
Summary of Contents for DynaMite 224906
Page 9: ...9 308266 Notes...
