![background image](http://html1.mh-extra.com/html/graco/b427-1-02/b427-1-02_owners-manual_2250757026.webp)
25
!
For a smaller baby, use the lower
shoulder slots and the upper strap
loops.
The ends of the straps must hang in
front of the junction plate.
Lift up the strap ends to check that
the loops are completely within the
junction plate slots and pull on the
straps to be sure they are secure.
!
For a larger baby, use the upper
shoulder slots and the end strap
loops.
Check that the straps are
completely within the junction plate
slots and pull on the straps to be sure
they are secure.
WARNING: Use extreme
care in threading the straps
according to the diagram. If the
straps are not secure, they will not
protect your baby.
Choosing the
seat location
See fitting chart on page 88-89 for
specific vehicle seating position.
DO place car seat in a forward-facing
vehicle seat. The seat can be placed
on the rear or front seat of the car
(except cars fitted with a passenger
air bag).
DO NOT place car seat in a vehicle
seat that uses an air bag.
DO NOT place car seat in a
rear-facing vehicle seat.
DO NOT place car seat in a
side-facing vehicle seat.
The car seat alone must be fastened
in the car with a three point belt with
or without a retractor, which has been
approved to ECE regulation No. 16 or
equivalent standard. Base could be
used with both 2 or 3 point belts.
13
14
11
12
15
16
17
18
Summary of Contents for B427-1-02
