Instructions
4
3A1963G
5. Grease o-ring (6) and install in block opening (1a)
as shown in F
6. Be sure o-ring (5) is installed on bolt (4) as shown in
7. Install vent valve mounting bolt (4) through hole (1b)
in block (1) and into G3 pump (F
. 5). Tighten
mounting bolt (4) securely then torque to 35 ft. lbs.
(47.45 N.m).
NOTE:
System connection is made through primary
outlet (4a).
8. Plug (10) can be removed to install a pressure
gauge or to use this port as an outlet
.
Step 9 applies to models 571169, 571170, 571171,
571172 only. All other models skip this step and
continue instructions with Step 10.
9. Connect end of cable (13) to the G3 (F
NOTE:
To verify the correct port on the G3 is
selected, locate the symbol shown in F
. 7 on the
G3 label.
F
IG
. 4:
F
IG
. 5: Right Side Installation Shown
6
1a
ti17733
4
1
1b
7
4a
5
F
IG
. 6
F
IG
. 7
10
ti17730
13
Vent Valve
Symbol
ti15593