Service
8
311485D
6.
Grease o-ring (207) and place on sleeve. Slide one
o-ring (207) inside cylinder (205). Slide sleeve/pis-
ton rod assembly (222) into bottom of cylinder.
7.
Install male gland (204) in cylinder (205).
8.
Alternately stack UHMWPE packings (238) and
leather packings (237) (note orientation).
9.
Place female gland (217) in top of cylinder. Loosely
install packing nut (202) and plug (201).
10. Reassemble intake valve (213) as shown.
11. Place intake valve (213) assembly in vice. Install
cylinder (205) assembly to intake valve. Torque to
350 ft.-lbs (475 N•m).
12. Torque packing nut (202) down to 50 ft.-lbs (68
N•m).
222
207
205
207
217
238
204
222
237
Lips Down
Lips Down
205
ti7884a
202
201
213
212
207
214
215
209
ti7873a
ti7882a
