Service
6
311485D
3.
Select proper ball travel for material sprayed. Reas-
semble as shown.
Piston Rod Disassembly
1.
Tap piston rod out of cylinder with a hammer or flip
over and tap piston rod out against bench. NOTE:
Sleeve may come out of cylinder with piston rod.
2.
If piston rod and sleeve did not separate, invert pis-
ton rod (222) and sleeve (220) and pound on hard
surface until piston rod comes out of sleeve.
3.
Hold piston valve (210) securely in vice. Using a
wrench, separate piston valve (210) from rod (222).
4.
Remove parts. Note orientation of parts for reas-
sembly.
5.
Clean all parts with a compatible solvent and
inspect them for wear or damage. Replace any worn
parts.
Component Rupture Hazard
. Do not clean or wipe
piston valve threads. Cleaning the piston valve threads
could destroy the special sealing patch and cause the
piston valve to come loose during operation, causing
pump bursting and possible serious bodily injury.
Shortest Ball Travel
Longest Ball Travel
ti7881a
ti7874a
(for light material)
(for heavy material)
ti7877a
222
210
ti7880a
222
218
203
223
219
206
210
Lips Up
Lips Up
ti7878a