![background image](http://html1.mh-extra.com/html/graco/24m510/24m510_assembly-installation-and-operation-instructions_2253087006.webp)
Warnings
6
3A2592A
FIRE AND EXPLOSION HAZARD
When flammable fluids are present in the work area, such as gasoline and windshield wiper fluid, be aware that
flammable fumes can ignite or explode. To help prevent fire and explosion:
•
When installing a cord reel above a hazardous location the reel must be mounted at such a height that the lamp
guard cannot reach within 18 inches of the floor.
•
Do not plug one cord reel into another.
•
Avoid overheating, do not cover cord reel or accessories with any material.
•
Always unplug cord reel when not in use.
•
Use equipment only in well ventilated area.
•
Eliminate all ignition sources, such as cigarettes and portable electric lamps.
•
Keep work area free of debris, including rags and spilled or open containers of solvent and gasoline.
•
Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
•
Stop operation immediately
if static sparking occurs or you feel a shock
.
Do not use equipment until you iden-
tify and correct the problem.
•
Keep a working fire extinguisher in the work area.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
•
Inspect thoroughly before each use. Do not use if damaged. Replace worn or damaged parts immediately with
genuine manufacturer’s replacement parts only.
•
Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety haz-
ards.
•
Make sure cord reel is rated and approved for the environment in which you are using it.
•
Use equipment only for its intended purpose. Call your distributor for information.
•
Route power cords and accessory cords away from traffic areas, sharp edges, moving parts, and hot surfaces.
Do not run cord through ceilings, walls or floors.
•
Do not drive, drag or place objects over cord reel cord.
•
Do not walk on cord.
•
Do not use cord to pull equipment.
•
Keep children and animals away from work area.
•
Comply with all applicable safety regulations.
WARNING
MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
•
Keep clear of moving parts.
•
Do not operate equipment with protective guards or covers removed.
Summary of Contents for 24M510
