Graco 24M510, Assembly, Installation And Operation Instructions

Page: 22 / 34

Troubleshooting
22 3A2592A
Troubleshooting
Repair instructions for some of the Solutions in this Troubleshooting Table are included in a separate repair instruc-
tion manual for this product.
Problem Cause Solution
Cord will not retract fully
Outlet attachment is too heavy
Increase spring tension. See
Increasing Spring Tension, page 14.
Spring lost tension
Spring is broken
Replace spring. See Replacing
Spring Cassette instructions in the
Cord Reel Repair and Parts man-
ual.
Cord will not retract at all
Spring is broken
Replace spring. See Replacing
Spring Cassette in the Cord Reel
Repair and Parts manual.
Spring has lost tension
Increase spring tension. See
Increasing Spring Tension, page 14.
Reel will not latch
Broken pawl
Replace pawl. See instruction man-
ual included with Latch Kit 15Y503.
Broken pawl spring
Replace pawl spring. See instruc-
tion manual included with Latch Kit
15Y503.
Pawl not lined up with ratchet plate.
See F
IG
. 4, page 9 for correct oper-
ating position. Realign pawl with
ratchet plate if not correctly posi-
tioned.
No electrical power at the output
end of accessory cord
Accessory disconnected from cord
end Reconnect accessory to output end
of accessory cord.
Accessory is broken Replace accessory.
Wires are not connected
Check all connections. Reconnect
any loose wires connections.
Worn slip-ring /brushes
Replace worn slip-ring/brushes.
See Cord Reel Repair and Parts
manual.