Graco 24F472, Operation

Page: 7 / 16

Operation
3A1215D 7
Setup
Distance Units
A
Distance Units
Bead Gun Enable/Disable
Adjust Display Contrast
Display SPACE or CYCLE
GALLONS or LITERS B
C
D
E
System Type F
A
B
A English ft/in/mph
Metric
m/cm/kph
C Exit
Changing units will reset
to factory settings
Bead Gun Solenoids
B
A Solenoid 2 ENABLE DISABLED
C
Adjust Display Contrast
A Reset to factory default
B
Exit
Current Setting: Factory Default
B
Distance Calibration
Diagnostics
Marker Layout Mode
Setup
Set Gun Delays
Pump Calibration
D
B
C
D
E
F
A
C
D
E
Press to choose between SPACE or CYCLE
to be displayed on the main menu.
Press to choose between GALLONS or LITERS
CHANGE
Solenoid 4 ENABLE DISABLED
Solenoid 6 ENABLE DISABLED
D Exit
Press A or B to switch English or Metric Units.
1. Use adjacent arrow to change the display contrast.
2. Press “A” to reset to factory default setting.
This menu allows the user to turn off individual bead gun solenoids.
1. Press “A” to ENABLE/DISABLE solenoid 2.
2. Press “B” to ENABLE/DISABLE solenoid 4.
3. Press “C” to ENABLE/DISABLE solenoid 6.
Configure control to connect to
original single wheel tow-behind
Roadlazer system?
B
A Yes
F
NO - cancel with no changes
ti16378b