![background image](http://html1.mh-extra.com/html/graco/24f472/24f472_operation_2251207003.webp)
Component Identification and Function
3A1215D
3
Component Identification and Function
Switch / Indicator
Explanation
A - F
Menu Controls
Provides menu specific commands as display on LCD screen. Provides skipline paint and cycle
distance storage for instant change. Press and hold button to store pattern.
G
Power ON/OFF
switch
ON enables battery DC power to the Skipline Control. OFF removes power from the Control and
grounds the engine spark-plug. Engine can not be started when this switch is in the OFF position.
NOTE:
This switch is also used to perform an emergency shutdown of the entire system.
H
Paint gun switches
1, 2 and 3
Enables/disables paint guns 1, 2 and 3. Up – skip line. Center – off. Down – continuous line. In
skipline mode, a new cycle will be activated each time unless another switch is already activated.
J
RESET/HOLD switch HOLD disables paint guns 1, 2 and 3 and resets the internal cycle counter. RESET resets the
internal cycle counter but does not affect continuous line activity. If switch is held in RESET, a
new cycle will not begin until the switch is released.
K
switch Used in conjunction with the arrow switches to adjust the paint line position to match a previously
painted line.
allows the dash line to be moved forward.
allows the dash line to be
moved closer. The
switch adjusts the position by 1/10’ every time it is toggled.
L
BEADS ON/BEADS
TEST
Enables/disables bead gun BEADS ON (up) – beads start to flow when paint guns start to paint.
Center – off. BEADS TEST (down) – continuous bead flow.
M
I/O cable port
The control cable connects here and at the striping system. The cable also brings in 12 VDC from
the striping system. See page 19.
N
Start Skip Space
Choose between starting with paint or space in skip line.
P
SYSTEM DELAY
ON/OFF
OFF – the paint guns and RESET/HOLD respond immediately. ON – the paint gun switches 1, 2
and 3; and RESET/HOLD switch are delayed by the preset system delay distance.
R
MENU arrow
switches
Used to switch between menus, adjusting values and resetting values.
S
Arrow switches
Used in conjunction with the Skipline Controller’s menus to adjust on-screen values.
T
Remote control
switch
Overrides the RESET/HOLD switch (J) when activated.
POWER
ON
OFF
RESET
HOLD
BEADS ON
BEAD TEST
A
B
C
D
E
F
SYSTEM
DELAY
START
SKIP
SPACE
MENU
MENU
PROGRAMMABLE
SKIPLINE CONTROL
ti16359a
N
T
L
R
P
G
H
J
K
S
Summary of Contents for 24F472
Page 15: ...Notes 3A1215D 15 Notes...