309969C
Instructions
248187 Rupture Disk
Assembly Kit
Install in Electric Reactor
™
heater inlet manifold or in Hydraulic Reactor pump to prevent
overpressurization.
Contents
Electric Reactor Kit Installation . . . . . . . . . . . . . . . 1
Hydraulic Reactor Kit Installation . . . . . . . . . . . . . . 4
Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . 6
Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Electric Reactor Kit Installation
NOTE: To convert earlier style electric Reactor heaters that
do not have rupture disk assemblies, order two kits.
Disassembly
1.
Turn main power OFF
. Disconnect power supply.
2.
Relieve pressure, see Reactor operation manual.
Important Safety Instructions
Read all warnings and instructions in your Reactor
manual. Save those instructions.
Read warnings in Reactor repair manual. To avoid
severe burns, wait for heaters and fluid to cool before
installing kit.
