![background image](http://html1.mh-extra.com/html/graco/246085/246085_installation-and-operation-manual_2251056008.webp)
Downloading
8
309867G
Downloading
Hardware Connections
1.
See drawing on page 14. Connect cable (7) to con-
verter (2) and to appropriate serial port on PC.
2.
Remove Reporter cable from Reactor interface
module (1) and insert in converter (2).
3.
Connect power supply (8) to converter (2). Plug
power supply into outlet.
Run Program
Main Window
Locate Menu Bar (M) and Tool Bar (T), for reference.
See F
. 1.
Start Reactor Downloading program on PC. Check that
status indicator (L) at upper right of main window is
green; also see Status Bar (S).
If PC uses a USB port, connect a USB to RS-232
serial adapter between the PC and cable (7).
Clicking status indicator (L) turns CommPort
Enable on and off, provided Reporter is properly
connected to PC.
If indicator is red and following message appears,
connection is broken.
Check that:
•
CommPort is enabled
•
correct CommPort is selected (CommPort
Properties window)
•
cable (7) is connected properly, see left
•
Reporter is displaying main screen, page 5.