Graco 237020, Instructions-Parts List Manual

Page: 9 / 28

Installation – Mounting Options
Ceiling Mounting Directly to an I-Beam
NOTE: The reel base is slotted (A) to allow two screws
to be started before mounting the reel to the support.
See Fig. 4.
1. Using the template (B) provided, drill holes in the
I-Beam (C). See Fig. 5.
2. Continue with Step 2 of Ceiling Mounting
Without an I-Beam on page 8.
Ceiling Mounting to an I-Beam Without
Drilling Holes
NOTE: All accessories mentioned are shown on pages
22 to 24.
1. Secure two accessory mounting brackets (D) as
shown in Fig. 6. Use two mounting brackets for
each 1 to 3 capacity mounting channels (F).
2. Position the adjustable clamps (E) of the mounting
brackets over the I-Beam (C), and tighten them
securely. See Fig. 6.
3. Continue with Step 2 of Ceiling Mounting
Without an I-Beam on page 8.
Wall Mounting
NOTE: All accessories mentioned are shown on pages
22 to 24.
1. Select the reel bank mounting location. Mount the
reel to a wall, using the provided template (B) for
laying out the holes you drill.
You can mount an accessory base plate (304) to
the wall for easier removal of the hose reel for
servicing. See Fig. 7.
2. Continue with Step 2 of Ceiling Mounting
Without an I-Beam on page 8.
Fig. 5
C
B
A
03719A
1655
Fig. 6
E
C
D
F
Fig. 7
304
B
03720A