background image

20

307-928

TECHNICAL DATA

Maximum working pressure

3000 psi (210 bar)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum incoming air pressure

100 psi (7 bar)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Ratio

30:1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum recommended
 pump speed

60 cpm (1.0 gpm [3.8 liters/min])

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

at continuous operation

Air consumption

approx. 23 scfm

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(0.79 m

/min) at 1.0 gpm

(3.8 liter/min) flow rate at

70 psi (4.8 bar) air pressure

Wetted  parts

See separate component instruction manuals

. . . . . . . . . . . . . . . . . . . . . 

is a registered trademark

THE GRACO WARRANTY AND DISCLAIMERS

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workman-
ship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy
for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the
equipment proven defective. This warranty applies only when the equipment is installed, operated and maintained in
accordance with Graco’s written recommendations. 

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty instal-
lation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the
incompatibility with Graco equipment of structures, accessories, equipment or materials not supplied by Graco, or the
improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materi-
als not supplied by Graco. 

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco
distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any
defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the
equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which
charges may include the costs of parts, labor and transportation.

DISCLAIMERS AND LIMITATIONS

THE TERMS OF THIS WARRANTY CONSTITUTE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY OTHER WAR-
RANTIES (EXPRESS OR IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PUR-
POSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED ON NEGLIGENCE OR STRICT LIABILITY.
EVERY FORM OF LIABILITY FOR DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS IS EXPRESSLY EXCLUDED AND DENIED. IN
NO CASE SHALL GRACO’S LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE. ANY ACTION FOR BREACH OF WARRANTY MUST
BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF SALE.

EQUIPMENT NOT COVERED BY GRACO WARRANTY

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS, OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO.

These items sold, but not manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the war-
ranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for
breach of these warranties.

IMPORTANT PHONE NUMBERS

TO PLACE AN ORDER, contact your Graco distributor,
or  call this number to identify the distributor closest to
you: 

1–800–328–0211  Toll Free

FOR TECHNICAL ASSISTANCE, service repair infor-
mation or assistance regarding the application of Graco
equipment:

1–800–543–0339 Toll  Free

Sales Offices: Atlanta, Dallas, Detroit, Los Angeles, Mt. Arlington (N.J.)

Foreign Offices: Canada; England; Switzerland; France; Germany; Hong Kong; Japan; Korea

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

PRINTED IN U.S.A.   307–928   12–88   Revised 5/93

PTFE

Summary of Contents for 224-625 A Series






















Reviews: