LL250 Compressor Installation
24
332230N
23. Now that compressor is secured to the coupler
shaft, slightly loosen the two mounting screws
between the frame and bracket. Install all four
carriage bolts (8), washers (9), and lock nuts (10),
and torque to 150-160 in. lb (16.9-18 N•m).
Re-tighten the two mounting screws to 23-27 ft. lb
(31-37 N•m).
24. Install compressor guard using three screws (13),
lock washers (14), and flat washers (15). Torque to
130-150 in. lb (14.7-16.9 N•m).
25. Apply thread sealer to threads of tee fitting (6).
Install tee fitting with safety valve (7) into
compressor output. Use an 11/16 in. wrench and a
9/16 backup wrench to attach the braided hose from
the air tank to the compressor. Install air filter (22).
Hand tighten.