LL250 Compressor Installation
332230N
23
20. Use two carriage bolts (8), two washers (9), and two
nuts (16) in opposing holes (180 degrees apart) to
tighten the compressor to the mounting bracket (4).
21. Using a long screw driver, slowly rotate the fan
pulley until the two M8x10 set screws appear in the
set screw access. Torque the set screws to 150-160
in. lb (16.9-18 N•m). Again, slowly rotate the fan
pulley until the single M5x8 set screw appears in the
access and tighten it to 37-42 in. lb (4-4.7 N•m).
NOTE:
Do
not
use ball end Allen wrenches, as they
may break and become stuck in the set screws.
22. Remove two carriage bolts (8), two washers (9), and
two nuts in opposing holes (180 degrees apart), and
rotate the compressor clockwise 90 degrees back to
the upright orientation.
