background image

Graco Extended Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from 

defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, ex-

tended, or limited warranty published by Graco, Graco will, for a period of twenty-four months from the date of sale, repair or re-

place any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, 

operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused 

by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, 

or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incom-

patibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, 

manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor 

for verific tion of the claimed defect. If the claimed defect is verifie , Graco will repair or replace free of charge any defective parts. 

The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose 

any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, 

labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. 

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no 

other remedy (including, but not limited to, incidental or consequential damages for lost profit , lost sales, injury to person or 

property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought 

within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT 

MANUFACTURED BY GRACO. 

These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are 

subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim 

for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equip-

ment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of 

contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceed-

ings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties 

reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procé-

dures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures 

concernées.

Graco Information

For the latest information about Graco products, visit www.graco.com.

TO PLACE AN ORDER

, contact your Graco distributor or call to identify the nearest distributor.

Phone:

 612-623-6928 

or Toll Free:

 1-800-533-9655,   

Fax:

 612-378-3590

All written and visual data contained in this document refle ts the latest product information available at the time of 

publication. Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 333469 / M0303

Graco Headquarters:

 Minneapolis

International Offices:

 Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

February 2016

Summary of Contents for 127650

















































































Reviews: