Grace SR2+, Assembly Instructions Manual

Page: 7 / 20

pg. 7
Step 3: Frame End Left & Right
Assembly
Parts Needed:
-Frame End Left (1)
-Frame End Right (1)
-M6 x 10mm Connector Bolt (8)
3-1: Put (1) Frame End Right to the right side
of the Right Leg, align the 2 groups of screw
holes with the screw holes on the leg and
screw in (4) M6 x 10mm Connector Bolt.
3-2: Assemble the Frame End Left in the same
way as Step 3 to the Left Leg, see Fig. 3-1.
Assemble the two Frame Ends in the same
way for the queen size frame and crib size
frame.
Step 4: Tracks Assembly
Parts Needed:
-Short Track Support (4)
-Long Track Support (2)
-M6 x 10mm Connector Bolt (16)
-Long Track (2)
4-1: Lay a Short Track Support on a table
support, aligning the holes in the track support
with the holes on the table support. The sides
without holes are on the outside of the frame,
see Fig. 5. For a crib size, use only the (4)
short track supports, and assemble them the
same way as king size frame.
4-2: Attach the Track support to the table
support by screwing (2) M6 x 10mm Connector
Bolt, see Fig. 4. For the crib size frame, use
the (4) Short Track Support only and assemble
the same as king size frame.
Note: Leave all bolts loose at this time.
4-3: Repeat Step 4-2 with the Long Track
Support and the other Short Track Support.
Be sure they lie in a straight line. See Fig. 4.
4-4: Press the Long Track onto the Track
Support by allowing the Track Support to be
pinched tightly by the Long Track. Be sure the
Track Support bottoms out on the Long Track.
See Fig. 4-1.
Short Track Support
Short Track Support
Long Track Support
Fig.4
Fig.4-1
M6 x 10mm
Connector Bolt
Frame End
Right
Frame End
Left
Fig.3-1
(4) M6 x 10mm
Connector Bolt
M6 x 10mm
Connector Bolt
Fig.3
Fig.4-2