pg. 12
Note: It may be neccessary to adjust the Rail
Bracket Holders up to fit the Sewing Machine.
Loosen the Wing Knob on each of the Rear
Rail Bracket Holders and move the Rail Bracket
Holders up. See Fig 9-1
9-1: Place your sewing machine onto the Top
Plate of the Carriage, and center it, from side
to side and from front to back.
9-2: Pull the Sewing Machine Clamp Handle
in the open position slide it into the slot on
the Top Plate until it is touching the sewing
machine. Push the handle down to lock the
Clamp into position, as shown in Fig. 9-2 and
Fig. 9-3. Repeat this with the remaining (3)
clamps.
Fig.9-2
Fig.9-3
Fig.9-4
Fig.9-5
Congratulations on the completion of the assembly of your new Start Right 2 Frame!
All that remains is to install your fabric and begin quilting!
Wing Knob
Fig.9-1
Summary of Contents for SR2+
Page 19: ...pg 19 ...
