6
Step 1: Outer Leg Sub-Assembly
Parts Needed:
4- Legs
4- Leveling Feet
2- Top Leg Braces
2- Middle Leg Braces
16- 6mm X 10mm SBHC Screws
Tools Required:
4mm Allen Wrench
1-1: Screw a Leveling Foot into the bottom of each of the legs as
shown in Fig (1-1).
***Do not tighten the screws till you have completed step 1.***
1-2: Lay the two Leg Assemblies down to simplify this step. Make sure
the four holes on the face of the Legs are to the outside and secure
the Middle Leg Brace on the middle of the leg with four (4)
6mmX10mm SBHC Screws.
1-3: Secure the Top Leg Brace on the top of the leg with four (4) 6mm
X10mm SBHC Screws. Tighten the 6mm X 10mm SBHC Screws using
the 4mm Allen Wrench to secure them in place.
1-4: Repeat the first three steps to complete a total of two (2) Outer
Leg Assemblies as shown in Fig (1-2).
Step 2: Middle Leg Assembly (Queen Only)
Parts Needed:
2- Legs
2- Leveling Feet
2- Top Leg Braces
1- Middle Leg Braces
12- 6mm X 10mm SBHC Screws
Tools Required:
4mm Allen Wrench
2-1: Repeat steps 1-2 & 1-3 of the Outer Leg Assembly as shown in
Fig (1-2).
2-2: Secure the two Top Leg Braces on the top of the legs with eight
(8) 6mm X10mm SBHC Screws. Make sure the two folds on the Top
Leg Braces are to the inside as shown in fig (2-1).
Step 3: Frame End Sub-Assembly
Parts Needed:
2- Take-Up Rail Fixtures
1- Right Frame End
1- Left Frame End
2- Plastic Knobs
6- 6mm X 35mm Hex Screws
Fig (1-2)
Fig (1-1)
Fig (2-1)
