manualshive.com logo in svg

Grace M905, Manual, Page: 33 / 44

Share
Download
Grace M905 Manual Download Page 33

33

or may not be at the same revision level (check the website for the latest revision information).  When-

ever firmware is updated on the system, the user should confirm that all three firmware sets are the 

most current.  In the event that incompatible firmware revisions are accidentally loaded on the system, 

the m905 RCU will display an error message instructing to update the system firmware.  The currently 

loaded firmware revisions will be displayed on this message screen for reference.

Important note:

 Our bootloader is currently NOT compatatble with Mac OSX computers. So the upgrade 

process can only be done using a Windows computer. 

 

„

UPDATING RCU FIRMWARE

TO UPDATE THE FIRMWARE ON THE m905 RCU PERFORM THE FOLLOWING STEPS:

•  Download the m905 RCU firmware package from the Grace Design website and unzip it on your com-

puter.

•  Turn off the m905 and connect your computer via USB to the USB upgrader port on the m905 RCU.

•  Turn on the m905. The setup button will illuminate solid white on the remote control to indicate USB  

upgrader mode is active. Note that the LCD display will be dark.

•  Once the m905 initializes it will ap-

pear on your computer as a ‘mass 

storage class’ device with the name 

m905_RCU. 

•   Open the folder.  It will contain a 

single file named “READY.TXT”

•   This indicates that m905 RCU is now 

ready for the firmware update.  Sim-
ply locate the firmware file that was 
downloaded (filename starts with 
m905_RCU), drag and drop the file to 
the folder containing READYTXT.

•  Once the file appears in the folder, it 

has been copied and the m905 RCU 
begins updating its flash memory.  
DO NOT DISCONNECT THE DEVICE 
OR INTERRUPT POWER TO THE m905 
WHILE THIS IS IN PROCESS. 

Summary of Contents for M905













































Reviews:

No comments