13
Speaker MUTE mutes the signal going to the selected speaker and sub (if assigned) output(s). When
the speaker MUTE is active, the switch is lit solid red and the speaker MUTE icon is shown on the speaker
status display.
SOLO mode provides a means to monitor left or right channel program material exclusively. When SOLO
mode is active, the button flashes red. The active SOLO channel is indicated on the speaker and head-
phone status display. In left channel SOLO mode, the right channel is muted in the speaker and head-
phone outputs.* In right channel SOLO mode, the left channel is muted in the speaker and headphone
outputs.* (NOTE: Enabling MONO during SOLO mode routes the active solo channel to both left and
right outputs.
*
The operation of the sub output in SOLO mode depends on the selected sub configuration. In L + R stereo
sub mode, the left and right solo feature is available and follows the speaker / headphone solo. For any other
sub configuration, the sub output mutes when SOLO is active.
PRESS AND RELEASE BUTTON:
• Toggles the speaker output mute on and off (if solo mode is off ).
• Disables speaker / headphone solo if solo mode was active.
PRESS AND HOLD BUTTON:
• Enables the solo mode if solo mode was inactive. The last used solo mode (left or right) is activated upon
entering solo mode.
• Toggles the left / right channel solo mode if solo mode is already active.
SUB MUTE / (
sub
-
solo
) - The multi-function SUB MUTE / (sub-solo) button controls the sub-mute and sub
-solo features.
NOTE: These features are only available when the SUB/DAC/METER is configured for sub output
mode in SETUP.
SUB-MUTE mode mutes the signal going to the sub output (if assigned). When the SUB-MUTE is active,
the switch is lit solid red.
Sub-solo mode provides a means to monitor the sub output program material exclusively. In Sub-solo
mode, the speaker output is muted and only the sub output is on. When Sub-solo mode is active, the
button flashes red.
PRESS AND RELEASE BUTTON:
• Toggles the sub output mute on and off (if sub-solo is disabled).
• Disables sub-solo if sub-solo mode was active.
PRESS AND HOLD BUTTON:
• Toggles sub-solo mode on and off.
DIM / (x-
feed
) - The multi-function DIM / (x-feed) button controls the speaker DIM and headphone x-feed
features.
Speaker DIM attenuates the speaker and sub (if assigned) by the preset attenuation level configured in
SETUP. When speaker dim is active, the switch is lit solid yellow.
Headphone x-feed engages the cross-feed circuit in the headphone output. When x-feed is active it is
indicated on the headphone status display. X-feed (cross-feed) simulates the acoustics of a loudspeaker
listening environment which can significantly improve imaging while reducing listening fatigue when