Installation
Install the printer
1. Please put the printer on the stable surface.
2. Make sure printer power is turned off, please do not plug
the power cable when the printer power is turned on.
3. Connect serial or USB or Parallel or Ethernet cable to
printer and PC.
4. Connect power plug to power supply socket.
Be careful:
※
Please turn off the power switch the printer in the power socket,
※
Transmission interface in the picture will vary depending on your printer
purchased aircraft type, the actual transmission interface, please refer to
the corresponding product specifications
power line is inserted into the printer.
<Picture 6>
Ribbon installation
1
.
Open the printer’s top cover by
pressing two buttons located on left and
right side of printer.
2
.
Insert the ribbon right side onto the
ribbon supply hub.
3
.
Install the ribbon supply hub into
triangular gear
from left
to
right
side, and
let it run smoothly.
4
.
Turn the blue switch on the right side of
print head, the print head access will be
turned out.
5
.
Insert the paper core onto the ribbon
rewind hub, stick the ribbon onto the
paper core.
6
.
Install the ribbon rewind hub into
triangular gear
from left
to
right
side, and
let it run smoothly.
7
.
Turn the ribbon rewind gear until the
ribbon is thoroughly without wrinkle and
the black section of the ribbon covers the
print head.
8
.
Close the print head access and the
top cover.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Summary of Contents for GP-1624T
Page 17: ......
