GPRINTER GP-1624T, User Manual

Page: 5 / 17

Print specifications
Models
Models
The print head
Print mode
Ribbon specifications
The paper size
The outer coil type
Pulse excitation
(the size) (width X length)
Print speed (inches per second)
Maximum print width
Maximum print length
Heat sensitive piece (wear)
Ribbon diameter
The ribbon length
The ribbon axis size
The ribbon width
Ribbon winding form
Label length
The paper height gap spacing
Roll axis size
The thickness of the paper
(tag + bottom paper)
The width of the paper
(tag + bottom paper)
The paper winding form
Paper type
The maximum capacity of
internal paper roll diameter
Print out of plane roll / print surface involute
Continuous paper, gap of paper, paper folding, punched paper
Note: If you use the tag length less than 25.4mm (1 "),
recommend the use of a perforated line in the gap on
the label paper so the tear.
50km
Max.118mm (4.64")
GP-1624T/GP-1625T GP-1634T / GP-1635T
GP-1624T/GP-1625T GP-1634T / GP-1635T
203dots/inch(8dots/mm) 300dots/inch(12dots/mm)
0.083X0.083mm
(1mm = 12dots)
0.125x0.125mm
(1mm = 8dots)
2~6 inch/s 1~5 inch/s
Thermal Transfer / Direct thermal
104 mm (4.09")