GoWISE USA GW44806, User Manual

Page: 11 / 32

11
CONTROL DISPLAY
USING THE DIGITAL CONTROLS
NOTE:
The
3D Air Fryer Oven
uses 1700 Watts that are divided
among 3 heating elements. The
back heating element reaches
1200 Watts while the top and
bottom uses 250 watts each.
It is recommended to use the
back heating along with another
heating element if choosing
to use 2 instead of 3 heating
elements.
4. 4.
The FAN speed is defaulted to
HIGH. To change the fan speed,
press the
SPEED
button to
switch between high and low.
5. 5.
If using a rotisserie accessory,
press the
ROTISSERIE
button to
activate the rotisserie.
6. 6.
If you would like to pre-heat
your oven, press the
PRE-HEAT
button.
NOTE:
When PRE-HEAT is
selected, the unit will first heat to
your selected temperature, then
beep to alert you that it is time to
insert your food. Once you insert
your food and close the oven
door, the time will begin to count
down
7. 7.
Press the
(START/PAUSE)
button to begin cooking. The
icon and icon will light up on
the digital display meaning both
the fan and heating element are
running.
1. 1.
Once the unit is plugged in,
the display lights will flash
once with a single chime/beep.
The
(POWER)
button will be
illuminated.
2. 2.
Press the button to turn on
the oven and the digital display
will light up displaying zero.
NOTE:
The unit will automatically
shut down after 60 seconds.
3. 3.
Select a preset or manually set a
time and temperature to begin.
Customize Your Cooking Settings
Have complete control over your
cooking experience such as time,
temperature, heating element
settings, and fan speed.
1. 1.
Press the
TIME/TEMP
button
and the temperature setting will
flash first. Use the “ “ and “ “
arrows to adjust the temperature
in increments of 10° between
120°F – 450°F.
2. 2.
Once you have reached the
desired temperature setting,
press the
TIME/TEMP
button
again and the time setting will
flash. Use the “ “ and “ “
arrows to adjust time in 1 minute
increments up to 1 hour max.
NOTE:
Press and hold the “ “
or “ “ arrows to adjust time in
5 minute increments..
3. 3. As a default, all 3 heating
elements will be illuminated,
however you can change your
settings to use the top, bottom,
or back heating elements.