Using the Dehydrate Function
The Dehydrate function uses low heat
along with a built-in fan to dry out
food. It reduces the overall amount
of water found in fruits, veggies,
and other foods, so it won’t spoil so
quickly.
1.
1.
Select the
DEHYDRATE
preset.
The top and bottom heating
elements and a low fan speed
will be selected by default.
2.
2.
Use the
TIME/TEMP
button and
the “ “ and “ “ arrows to
adjust the time and temperature.
3.
3.
Press the button to start the
cooking cycle.
NOTE:
There is a dehydrating slot
located at the back of the oven.
Removing the cover plate from the
slot will allow for extra air flow and
faster dehydrating.
THIS PART MUST
ONLY BE REMOVED WHEN USING
THE DEHYDRATE FUNCTION. DO
NOT REMOVE THIS PART WHEN
USING OTHER FUNCTIONS.
12
Using the Presets
Your 3D Air Fryer Oven comes
with 12 cooking presets to take the
guesswork out of cooking times and
temperatures.
1.
1.
Press the button of your desired
preset. The selected preset
will illuminate and the preset’s
time and temperature will be
displayed on the digital display.
NOTE:
Refer to the
Cooking
Preset Chart
of this manual (pg.
20) for detailed default settings
for each preset.
2.
2.
To adjust preset settings, press
the
TIME/TEMP
button until the
desired setting flashes. Use the
“ “ and “ “ arrows to change
the settings. The temperature
can be adjusted in increments
of 10° between 120°F – 450°F
for all presets except Dehydrate.
The time can be adjusted in 1
minute increments between
1-60 minutes (except Dehydrate).
NOTE:
Press and hold the “ “
or “ “ arrows to adjust time
in 5 minute increments (except
Dehydrate).
3.
3.
Press the button to begin
cooking. The icon and
icon will light up on the digital
display meaning both the fan and
heating element are running.
NOTE:
Use the heating element
buttons to select single, dual or 3D
heating before starting the cooking
cycle.
CONTROL DISPLAY
USING THE DIGITAL CONTROLS
Summary of Contents for GW44806
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...