GOWIN GW1N-LV9LQ144C6I5 V1.1, User Manual

Page: 21 / 33

3 FPGA Circuits 3.6 Switches
DBUG398-1.1E 14(25)
signify power supply and FPGA loading status.
Users can test the LEDs in the following ways:

If the output signal of related pins is logic low, LED is on;

If logic is high, LED is off.
3.5.2 LED Circuit
Figure 3-4 LED Circuit
D3
47
D4 57
D5
60
D6 61
VCCO2
F_LED1
F_LED2
F_LED3
F_LED4
U6
3.5.3 Pinout
Table 3-4 LED Pinout
Signal Name Pin No. BANK Description I/O
F_LED1
47
2 LED1 3.3V, 2.5V, 1.2V
F_LED2
57
2 LED2 3.3V, 2.5V, 1.2V
F_LED3
60
2 LED3 3.3V, 2.5V, 1.2V
F_LED4
61
2 LED4 3.3V, 2.5V, 1.2V
3.6 Switches
3.6.1 Overview
Four slide switches are incorporated into the development board.
These are used to control input during testing.