ITS Camera System - Installation and User Manual
2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | Sales@GovComm.us
© GovComm, Inc. 2017
21
Interval:
The time interval between the two synchronizing actions by NTP server.It
can be set from 1 to 10080 minutes.
Note:
If the ITS Camera is connected to a public network, the user should use a NTP server
that has a time synchronization function, such as the server at the National Time Center
(IP Address: 210.72.145.44). If the ITS Camera is set in a customized network, NTP software
can be used to establish a NTP server for time synchronization.
•
Configuring Time Synchronization Manually
Steps:
(1) Check the
Manual Time Sync
radio button.
(2) Click the calendar icon to set the system time from the pop-up calendar.
(3) Click
Save
to save the settings.
Note:
The user can alsocheck the Sync with local time checkbox to synchronize the time of
the ITS Camera with the time of the computer.
•
Select the Time Zone
Purpose:
When the ITS Camera is taken to another time zone, the user can use the
Time Zone
function to adjust
the time. The time will be adjusted according to the original time and the time difference between the
two time zones.
To enter the Time Settings interface:
Configuration > System > System Settings > Time Settings
•
Configuring Time Synchronization by NTP Server
Steps:
»
(1) Check the radio button to enable the NTP function.
»
(2) Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.