CLEANING AND
MAINTENANCE
CLEAN THE KETTLE
• Unplug the kettle base.
• Let the kettle cool down and clean it with a damp sponge.
• Never immerse the kettle, its base, the cord or the electric plug in water. The
electrical connections or the switch should never come into contact with water.
• Do not use scouring pads.
CLEAN THE FILTER
The removable filter consists of a mesh to retain the particles of scale and
prevent them falling into your cup when pouring. This filter neither treats nor
removes the hardness of the water so it conserves all the qualities of the water.
With very hard water, the filter can clog very quickly, after 10 to 15 uses so it is
important to clean the filter regularly.
• If the filter is wet, put it under running water.
• If the filter is dry, brush it gently.
To remove the anti-scale filter, lift the kettle off its base and allow it to cool. Never
remove the filter when the appliance is full of hot water.
DESCALING
To keep the kettle working well, you should descale regularly, preferably at least
once a month or more frequently if your water is very hard.
There are three different ways you can descale your kettle:
Using white vinegar:
1. Fill the kettle with 2 cups of vinegar.
2. Let the vinegar soak in the kettle for 1 hour. Do not turn on the kettle during
this time.
3. Pour out the liquid and rinse 5 or 6 times.
Using citric acid:
1. Boil 2 cups of water in the kettle.
2. Add 5 teaspoons of citric acid and let it soak for 15 minutes.
3. Pour out the liquid and rinse 5 or 6 times.
Using a descaler:
1. Use a descaler specifically for plastic kettles and follow the manufacturer’s
instructions.
2. Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
CLEANING YOUR KETTLE
10
11
OPERATION FEATURES AND FUNCTIONS
OPERATING INSTRUCTI
ONS
BEFORE USING FOR THE FIRST TIME
1. Remove all packaging, stickers or accessories from both the inside and
outside of the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the cord
into the notch.
USE
1. Open the lid by pressing the button
at the top of the handle.
2. Fill the kettle with the desired amount of water:
• You can fill it through the spout, which ensures better maintenance
of the filter.
• Never fill the kettle when it is on its base.
• You must cover at lease the bottom of the kettle with water.
• Do not fill the kettle above the maximum level.
If the kettle is too full, boiling water may spill out.
• Do not use the kettle without water.
• Check that the lid is closed properly before use.
• The kettle must always be used with its own filter.
3. Close the lid.
4. Place the base on a flat, stable, heat-resistant surface, away from
any heat sources.
Note: Your kettle must only be used with the base that accompanies it and
with its own anti-scale filter.
5. Position the kettle on its base and plug it into the electrical outlet.
The power will turn on automatically once the kettle is placed on its base.
6. Press the button. You hear a beep and the kettle starts boiling.
OR
Maintain water temperature: Press for 3 seconds.
When the buzzer beeps, the heater will start
boiling and the LED light will be illuminated in red.
When the water reaches boiling, the kettle will
maintain the water temperature for 2 hours with
the insulation function.
Change the temperature to 140°F: Press once.
The LED light changes from red to green, and the kettle will
stop heating once the water temperature has reached 140°F.
Change the temperature to 158°F: Press twice.
The LED light changes from green to blue and the kettle
stops heating once the water temperature has reached 158°F.
Change the temperature to 176°F: Press three times.
The LED light changes from blue to yellow and the kettle
stops heating once the water temperature has reached 176°F.
Change the temperature to 194°F: Press four times.
The LED light changes from yellow to purple and the kettle
stops heating once the water temperature has reached 194°F.
6
. Once the water reaches the boiling point, or the chosen temperature, the
kettle will switch off automatically and the interior light & indicator light
turn off.
• If you want to stop it manually, remove the kettle from its base to pour
the water.
• Make sure that the On/Off button is in the Off position after boiling and that
the kettle has switched off before removing it from its base.
• Throw away the water from the first two/three uses.
• Do not leave water in the kettle after use as this quickens the formation
of scale.