19
EN
3. Pour the prepared food which is to be juiced into the feed
chute (
9
). The food is automatically guided into the device.
Use the plunger (
10
) to push food further down if neces-
sary.
The juice runs through the juice outlet into the vessel, the
pulp, smaller pips etc. drop from the pomace outlet (
7
) into
the pomace jug (
6
).
4. To switch off the device, move the dial to the
0
(Off) position.
5. Remove the mains plug from the plug socket after use.
6. Clean the device and the accessories after each use (see "Cleaning and Storage”).
Cleaning and Storage
PLEASE NOTE!
■
Before commencing the cleaning, note the safety instructions in the "Safety
Instructions” chapter!
■
Do
not
clean the motor unit in the dishwasher!
■
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. Release the locking clips (
3
) and take off the lid (
8
). If necessary, remove the plunger
(
10
) from the feed chute (
9
) beforehand.
2. Take off the pomace jug (
6
) and dispose of the fruit / vegetable residues.
3. Carefully pull out the stainless steel sieve upwards.
4. Detach the separating container (
1
) from the motor unit (
4
) and remove the fruit /
vegetable residues if necessary.
5. Pull the juice outlet (
2
) away from the separating container.
6. Clean the pomace jug, the separating container (
1
), the lid with feed chute and the
plunger with hot water and mild detergent or in the dishwasher.
7. Clean the stainless steel sieve with hot water and mild detergent For more intense
levels of mess, a brush can also be used.
8. If necessary, clean the motor unit with a damp cloth.
9. Dry all parts thoroughly or allow all parts to dry completely before the device is reas-
sembled.
10. Store the device in a dry, clean, frost-free place that is not accessible to children and
animals.
The plastic parts may suffer discolouration over time. However, this does not have
any negative effect on either health or the way that the device parts work.
