GMC-I Messtechnik GmbH
45
Data Evaluation and Reporting with the ETC Software
After all measurements have been completed, the structure is
transferred along with the pertinent data to ETC. Comments can
then be added to the individual measurements. After pressing the
appropriate key, a report including all measurements within the
structure is generated, or the data are exported to an Excel
spreadsheet.
Note
By turning the function selector switch, the database is
exited. The parameters previously set in the database are
not accepted for measurement.
16.4.1 Using Barcode and RFID Readers
Searching for a Barcode which has Already been Read In
The procedure can be started from any selector switch setting
and menu.
Ð
Scan the object’s barcode.
The search is started at the currently selected structural element
and works its way down into lower hierarchies. The retrieved
barcode is inverse displayed.
Ð
This value is accepted by pressing the ENTER key.
Note
An already selected object cannot be found.
Continued Search, General
Regardless of whether or not an object has been found,
searching can be continued with this key:
–
Object found: search below the previously selected
object
–
No additional object found: the entire database is searched at
all levels
Reading in a Barcode for Processing
If the menu for alphanumeric entry is currently open, any value
scanned by a barcode or RFID reader is directly accepted.
Using a Barcode Printer (accessory)
The following applications are made possible with a barcode
printer:
• Print-out of ID numbers for objects encrypted as barcodes
(allows for quick and convenient identification for periodic
testing)
• Print-out of repeatedly occurring designations, for example test
object types encrypted as barcodes in a list, which can be
read in for comments as required.
