42
GMC-I Messtechnik GmbH
Symbols of a Distributor Structure / Topology
16.3.1 Structure Creation (Example for Electrical Circuit)
After selection with the
MEM
key, all setting options for the cre-
ation of a topology are made available on three menu pages (1/3,
2/3 und 3/3). The topology consists of structural elements,
referred to below as objects.
Select the position at which a new object will be added
Use the
keys to select the requested structural elements.
Switch to the sub-level with
.
Scroll to the next page with >>.
Create a new object.
Press key
to create a new object.
Processing of selected structural element
Save Menu, Page 3 of 3
Search for ID number
> enter complete ID number
Search for text
> enter complete test (complete word)
Search for ID number or text
Continue search
Edit Menu
Cursor LEFT:
Select an alphanumeric character
Cursor RIGHT:
Select an alphanumeric character
ENTER: accept an individual character
Acknowledge entry
Cursor LEFT
Cursor RIGHT
Delete character
Switching amongst different types of
alphanumeric characters:
A
Upper case letters
a
Lower case letters
0
Numbers
@
Special characters
Symbol
Meaning
Distributor
A
check mark measurement symbol
next to a structural element means that all
measurements within the respective hierarchy have been passed.
Measurement symbol x
: at least one measurement has not been passed.
No measurement symbol:
no measurement has been performed so far.
Building
Customer
RCD
Electrical circuit
Equipment
Equipment
Same type of element as in Windows Explorer:
+: Sub-objects available, display by pressing
–: Sub-objects are displayed, hide by pressing
Scroll up
Scroll down
Acknowledge selection /
Display object
next page
change level
or ID number
Create object
Edit designation
V
A: show measurement data
Delete object
