Gossen MetraWatt METRACAL MC, Operating Instructions Manual

Page: 24 / 84

24 GMC-I Messtechnik GmbH
Control Functions
During Recording
In order to be able to observe measured values during recording ,
switch to the measuring function by pressing
MEAS / CAL | SETUP . After pressing MEAS / CAL | SETUP once again,
the display is returned to the
1nfo
menu where memory
occupancy can be queried with the
0CuPP
parameter.
Note

As soon as memory is full, the “Store” segment is cleared
from the display.
A new memory block is created when another measuring function
is selected with the rotary switch or the
OUT | ENTER key. Data stor-
age then continues automatically.
Ending Recording
store stop store
Ð
Press MEAS / CAL | SETUP in order to return to the measuring
function.
Ð
Memory mode operation can also be exited by switching the
multimeter off.
Querying Memory Occupancy
Memory occupancy can be queried during recording with the
help of the “
1nFo
” menu (see also section 7.3).
Memory occupancy range:
000
.
1
% to
099
.
9
%.
1nFo bAtt
:

...

0CCvP
%:
017
.
4
%
Memory occupancy can be queried before recording is started via
the “
1nfo
” menu.
1nFo 
...
 StorE 017
.
4
%
 StArt
Clear Memory
This function deletes all measured values from memory! This
function cannot be executed during memory mode operation.
1nFo 
...
 StorE StArt

Clear

yes
empty
→
StorE
OUT
ENTER
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
OUT
ENTER