1
3
5
2
Using P.I.R. Motion Detector & Enrolling Test
1. Press the clip and open the case
2. Insert the battery properly, and then close the cover
3. Fasten the screw for case
4. Press arm button on remote control, the LED indicator
of control panel goes on.
5. Press the test button of P.I.R. motion detector
6. If the alarm is activated, the motion detector has
been enrolled to the system.
7. Silence the siren by pressing disarm button on
remote control.
4
6
1
4
3
Using Door Sensor & Enrolling Test
1. Open the case and install the battery properly.
2. Arm the system by pressing arm
button on remote control.
3. Depart the transmitter and magnet.
4. If the alarm is activated, the door sensor
has been enrolled to the system.
5. Silence the siren by pressing
disarm button on remote control.
Indicator goes on
to enter arming state.
Indicator light up in red
when transmitter and
magnet departed.
5
2
9
8
