1. Open the case and install the battery properly.
2. Sensor can be installed on door or window that open and close.
Make sure the installed position have been already cleaned.
3. Remove the paper strip of the double-sided tape on the back of
transmitter and magnet. Carefully mount the transmitter on the
door frame and the magnet on the door.
4. Keep LED Indication light at the right direction.
Make sure the magnet is on the right of the transmitter.
5. Place the transmitter in the desired location,
mount the magnet no more than 1cm away from the transmitter.
6. Avoid mounting sensors in areas with a large quantity
of metal and electric wiring.
Installation:
Note!
The door sensor is set in Normal Zone1 as default.
It will cause on immediate alarm if the magnet depart from
the transmitter more than 2cm in arming state.
<1cm
The Door/Window Sensor can be installed on doors,
windows and any other objects that open and close.
The sensor transmits signal to control panel when the
magnet mounted near the sensor is moved away.
The tamper protection ensures that sabotage attempts
to move the sensor will result in an alarm activation.
2
3
4
5
7
6
1
.
Transmitter
2
.
LED Indicator
3
.
Magnet
4
.
Battery Compartment
5
.
Zone Jumper
6
.
Buzzer
7
.
Tamper Switch
Working Status:
Tamper Alarm:
Once intruder attempts to move the sensor,built-in buzzer
beeps.The control panel will send tamper alarm message to user at the first
time.
Please follow manual of alarm system for zone1 setup.
Zone Jumper:
The door sensor is set in normal zone as default.
1
LED flashes once:
Door or window is opened.
and the transmitter sends signal to the control panel.
LED flashes 5 times, and buzzer beeps 5 times:
Tamper alarm, low battery indication. If it’s in low
battery state,please replace it only with1.5V/AA LR6
Manganese Dioxide Cell (EXCELL, GP) immediately.
5
5
Wireless Door/Window sensor
21
20
