Reverse Camera Installation
6
|
P a g e
6. Connect the camera cable to the transmitter
7. Plug the receiver into the GPS/Monitor unit and ensure there is power
running to this unit.
8. While sitting in the
driver’s seat, place the car into reverse. The
monitor should turn on and show an image of the reverse camera.
Please ensure the camera has been placed in such a way that it is
perpendicular to the centerline of the car.
9. Replace any interior panels which you have removed to complete this
installation.
Please refer to
Figure 1
for camera placement
NOTE: Please ensure the GPS/Monitor is not in obstruction of your driving view.
Depending on state, local law authorities may deem this a violation of
the respective traffic act.
