Reverse Camera Installation
3
|
P a g e
Overview
——————————————————————
The Backup Camera System is intended to be installed as a supplement aid
to your standard rear view mirror that already exists in your vehicle. The
Backup Camera System should not be used as a substitute for the standard
rear view mirror or for any other mirror that exists in your vehicle. In some
jurisdictions, it is unlawful for a person to drive a motor vehicle equipped with
a TV viewer or screen located forward of the back of the driver’s seat or in
any location that is visible, directly or indirectly, to the driver while operating
the vehicle. Please consult local law authorities if unsure what you are legally
allowed to do.
Safety Information
——————————————————————
IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY
DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES
OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE
USE OF ANY PRODUCT.
If you are unsure of any steps please consult a professional to install this
device.
Place the monitor away from direct sun light, heat, water or moisture.
This product is made with precise electronic components. Handle with
care. Improper use can cause a malfunction.
Firmly fix the monitor stand to secure location. While installing the
Rear View
Be careful with the wire positioning in order to avoid wire damage.
The Rear View System should only be used when the vehicle is in
reverse. Do not watch movies or operate the monitor while driving, It
may cause an accident.
Do not install the monitor where it may obstruct drivers view or obstruct
an air bag device.
Dropping the unit may cause possible mechanical failure.
