Gosafe G626, User Manual

Page: 13 / 26

Remarks Reply Command Ctrl Word Description Sr.
5: open GPS module on demand,
closing 3D location in reservation
setting of GPS reach time, there
is no 2D location when GPS
research time is over, closing
module.
GSM mode consists of:
0: always on GSM;
1: open GSM module
on-demand. (Open conditions:
Getting LBS data, uploading data
according to setting and alarm
occurred). Then upload all data.
When alarm occurred, keep GSM
module ON. If there is no alarm,
wait until the working time. if
device received command
during the working time, recount
the time. Close module when
working time is up.
2: open GSM module on -
demand. (Open conditions:
Getting LBS data, uploading data
according to setting and alarm
occurred). Then upload all data.
Wait until the working time. If
device received command
during the working time, recount
the time. Close module when
working time is up.
3: open GSM module on -
demand. (Open conditions:
Getting LBS data, uploading data
according to setting and alarm
occurred). Then upload all data. If
there is no alarm, close module
immediately. When alarm
occurred, wait until the working
time. If device received
command during the working
time, recount the time. Close
module when working time is
up.
11